V40001898 datasheet(8/63 Pages) TOSHIBA

8 / 63 page

31. Scart input 1 in, left

50. Scart output 2, left

32. Analog Shield Ground 1

51. Scart output 2, right

33. Scart input 2 in, right

52. Analog Shield Ground 3

34. Scart input 2 in, left

53. Not connected

35. Analog Shield Ground 2

54. Not connected

36. Scart input 3 in, right

55. Not connected

37. Scart input 3 in, left

56. Analog output Channel 1, left

38. Analog Shield Ground 4

57. Analog output Channel 1, right

39. Not connected

58. Reference ground 2 high voltage part

40. Not connected

59. Analog output Channel 2, left

41. Not connected

60. Analog output Channel 2, right

42. Analog reference voltage high voltage part

61. Power-on-reset

43. Analog ground

62. Not connected

44. Volume capacitor Channel1

63. Not connected

45. Analog power supply 8.0 V

64. I2S2-data output

46. Volume capacitor Channel 2

65. I2S2-data input

47. Scart output 1, left

66. Digital ground

48. Scart output 1, right

67. Digital power supply +5 V

49. Reference ground 1 high voltage part

68. Not connected

HEADPHONE OUTPUT

TDA1308

The TDA1308 is an integrated class AB stereo headphone driver. It gets its input from two analog audio outputs (DACA_L

and DACA_R) of MSP3410D. The gain of the output is adjustable by the feedback resistor between the inputs and outputs.

Features:

Wide temperature range

No switch ON/OFF clicks

Excellent power supply ripple rejection

Low power consumption

Short-circuit resistant

High performance

- high signal-to-noise ratio

- high slew rate

- low distortion

Large output voltage swing

Pinning:

1. Output A (Voltage swing) : Min : 0.75V, Max : 4.25V

2. Inverting inputA

: Vo(clip) : Min : 1400mVrms

3. Non-inverting inputA

: 2.5V

4. Ground

5. Non-inverting input B

: 2.5V

6. Inverting input B

: Vo(clip) : Min : 1400mVrms

7. Output B (Voltage swing) : Min : 0.75V, Max : 4.25V

8. Positive supply

: 5V, Min : 3.0V, Max : 7.0V

AUDIO OUTPUT

TDA7265

The TDA7265 is a 25W+25W stereo sound amplifier with mute/stand-by facility. STPAcontrol signal coming from microcontroller

(when it is at high level) activates the mute function. IC is muted when mute port is at low level. Two stereo audio signals

coming from audio module is injected to the inputs of the IC and a power of 12Wrms (10%) is obtained. An external pop-

noise circuitry pulls AF inputs of the IC in order to eliminate pop noise when TV is turned on or off via mains supply

connection. It is possible to adjust the gain of the amplifiers by feedback external resistors.

Features:

n Wide supply voltage range (up to 50V ABS Max.)

n Split supply

n High output power: 25+25 W @ TDA = 10%, RL = 8ohm, VS = ±20V

n No pop at turn-on / off

n Mute (pop free)

n Stand-By feature (low IQ)

n Few external components

n Thermal overload protection

n Adjustable gain via an external resistor

V40001898 Scheda tecnica(PDF) 8 Page - Toshiba Semiconductor

V40001898 Scheda tecnica(HTML) 8 Page - Toshiba Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Scheda tecnica Scarica

Link URL