LED Relay Zone Controller 0-10V

with Auxiliary Wired Occupancy

• Interoperable. Communicates wirelessly with other

devices using the EnOcean wireless standard.

• Enables wireless dimming of a single fixture or a zone of

multiple daisy chained LED fixtures (e.g. 20 each 30W or 10 each 60W).

• Supports CaliforniaTitle 24 daylight harvesting scenarios, occupancy

control and manual dimming with input from self-powered wireless

switches and sensors. Implements load shedding initiated by separate

demand response controllers.

• Compact size enables flexible installation inside or next to

electrical boxes and fixtures.

• Electric surge protection exceeds IEC61000-4-5 installation

class 4.

• Commission your LED lighting with EnOcean's intuitive,

easy-to-use wireless Navigan™ software to link devices and

set parameters (e.g. timeouts, ramp speeds) from a laptop

computer. Manual push buttons may also be used for

linking and simple commissioning.

• Interface for wired external Occupancy sensor -

12 V DC Auxiliary and Sensor I/O

A simple solution for wireless control and daylight harvesting.

The LED relay zone controller uses wireless technology to communicate with other self-powered EnOcean-

based products and provides an amazingly simple solution for dimming control of LED lighting. The compact

size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of

sight using standard wiring practices. Simply link the module to an EnOcean-based motion sensor, light level

sensor, switch or rocker pad and experience levels of efficiency and convenience that can only be achieved

through wireless controls. It is also possible to link the LED controller to a central controller or via a gateway to

building automation systems like BACnet.

Features & Benefits

LEDR

LEDRU-W-AU

0-10V

Common

Relay load

12 V DC out

Sensor I/O

© EnOcean