TC7USB42MU

4

8.

8.

8.

8. Absolute Maximum Ratings (Note)

Absolute Maximum Ratings (Note)

Absolute Maximum Ratings (Note)

Absolute Maximum Ratings (Note)

Characteristics

Supply voltage

Input voltage (OE, S)

Switch I/O voltage

Clamp diode current

Switch I/O current

Power dissipation

VCC/ground current

Storage temperature

Symbol

VCC

VIN

VS

IIK

IS

PD

ICC/IGND

Tstg

Note

Test Condition



VCC = 0 V or Switch OFF

Switch ON

Control input

Switch



Rating

-0.5 to 4.6

-0.5 to 4.6

-0.5 to 4.6

-0.5 to VCC +0.5

-50

±50

50

200

±100

-65 to 150

Unit

V

mA

mW

mA



Note:

Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even

destruction.

Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report

and estimated failure rate, etc).

9.

9.

9.

9. Operating Ranges (Note)

Operating Ranges (Note)

Operating Ranges (Note)

Operating Ranges (Note)

Characteristics

Supply voltage

Input voltage (OE, S)

Switch I/O voltage

Operating temperature

Input rise time

Input fall time

Symbol

VCC

VIN

VS

Topr

dt/dv

Note

Test Condition



VCC = 0 V or Switch OFF

Switch ON



Rating

2.3 to 4.3

0 to 4.3

0 to 4.3

0 to VCC

-40 to 85

0 to 10

0 to 10

Unit

V



ns/V

Note:

The operating ranges must be maintained to ensure the normal operation of the device.

Unused inputs and bus inputs must be tied to either VCC or GND.

2020-06-16

Rev.4.0

©2020

Toshiba Electronic Devices & Storage Corporation