Copyright © Bridgetek Pte Ltd

11

MM930Lite Datasheet

Version 1.0

Document Reference No.: BRT_000085

Clearance No.: BRT#069

4.6

SPI Master Interface

The FT930Q microcontroller has a SPI master interface that supports single, dual and quad SPI data

transfer modes. There are two alternative connectors for supporting different LCD display modules as SPI

slave devices.



The J1 dual-entry 2x8 pins 2.54mm pitch, female header (located on top of boardError!

Reference source not found.) is designed for FT80x and FT81x Embedded Video Engine (EVE)

family LCD display modules. As an example the ME810A-HV35R module, can connect directly to

the MM930Lite development board on the bottom side with a male pin header.



The CN4 16 pins 0.5mm pitch, bottom contact FFC/FPC connector (located beneath boardError!

Reference source not found.) provides an alternative connection for LCD display modules that

meet FT80x or FT81X chip technical specifications and use a 16-pin 0.5mm pitch flexible flat

cable to link to the board.

Figure 4-7– SPI Master Interface