DWCS1700

Winson reserves the right to make changes to improve reliability or manufacturability.

© Winson, 2021/5/31

Page 1

AC / DC Sensing Current Sensor with Digital Data output

Feature:



Small package with digital current output



Operating voltage DC5.0V



Temperature compensation



Diameter 9.0mm conductor through hole



Sensing current range:

AC: 0~35A (50Hz, 60Hz)

DC: 0~±50A



High accuracy:

AC: (0~16A) ± 0.32A

(16~35A) ± 2%

DC: ±(0~16A) ± 0.32A

±(16~50A) ± 2%



Resolution: 148mA



UART digital data output，Baud Rare : 9600 bps



Isolation voltage 4KV

General Description:

DWCS1700 is a AC/DC current sensor with calibrated digital signal output.

It applies exclusive digital signal collecting technique and allows for easy

implementation without breaking original system. Typical applications include

load detection and management, over-current fault detection and any

intelligent power management system etc…

The DWCS1700 consists of a precise, low-temperature drift linear hall

sensor IC with temperature compensation circuit, temperature sensor, digital

signal processor and through-hole mechanism with a diameter of 9.0mm etc.

All the sensors on DWCS1700 are temperature compensated and

calibrated with accurate calibration instrument. The UART interface directly

transmits digital current signals, making system integration simple and fast.

Small size, low consumption and the terminals of the conductive path are

electrically isolated from the sensor leads enable DWCS1700 to be suited in all

kinds of harsh application occasions.