PMC21 datasheet(6/48 Pages) EH

6 / 48 page

Cerabar PMC11, PMC21, PMP11, PMP21

Endress+Hauser

Terms and abbreviations

URL

OPL

MWP

LRL

LRV

URV

A0029505

OPL: The OPL (over pressure limit = sensor overload limit) for the measuring device depends on the lowest-

rated element, with regard to pressure, of the selected components, i.e. the process connection has to be taken

into consideration in addition to the measuring cell. Pay attention to the pressure/temperature dependency.

The OPL may only be applied for a short period of time.

MWP: The MWP (maximum working pressure) for the sensors depends on the lowest-rated element, with

regard to pressure, of the selected components, i.e. the process connection has to be taken into consideration

in addition to the measuring cell. Pay attention to the pressure/temperature dependency. The MWP may be

applied at the device for an unlimited period. The MWP can be found on the nameplate.

The maximum sensor measuring range corresponds to the span between the LRL and URL. This sensor

measuring range is equivalent to the maximum calibratable/adjustable span.

The calibrated/adjusted span corresponds to the span between the LRV and URV. Factory setting: 0 to URL.

Other calibrated spans can be ordered as customized spans.

Pressure

LRL Lower range limit

URL Upper range limit

LRV Lower range value

URV Upper range value

TD Turn down. Example - see the following section.

The turn down is preset at the factory and cannot be changed.

Turn down calculation

LRV

URL

URV

LRL

1 = 2

A0029545

Calibrated/adjusted span

Zero point-based span

Upper range limit

PMC21 Scheda tecnica(PDF) 6 Page - Endress+Hauser Group Services AG