TMUX7201 datasheet(3/39 Pages) TI

3 / 39 page

5 Pin Configuration and Functions

VSS

GND

SEL

VDD

Not to scale

Figure 5-1. DGK Package, 8-Pin VSSOP (Top View)

VSS

SEL

GND

VDD

Not to scale

Thermal

Pad

Figure 5-2. RQX Package, 8-Pin WSON (Top View)

Table 5-1. Pin Functions

TYPE(1)

DESCRIPTION(2)

NAME

DGK

RQX

I/O

Source pin. Can be an input or output.

No connection. Not internally connected.

GND

Ground (0 V) reference

VDD

Positive power supply. This pin is the most positive power-supply potential. For reliable

operation, connect a decoupling capacitor ranging from 0.1 µF to 10 µF between VDD and

GND.

No connection. Not internally connected.

SEL

Logic control input, has internal Pull-Down resistor. For information about the switch

connection controls, see Section 8.5.

VSS

Negative power supply. This pin is the most negative power-supply potential. In single-supply

applications, this pin can be connected to ground. For reliable operation, connect a decoupling

capacitor ranging from 0.1 µF to 10 µF between VSS and GND.

I/O

Drain pin. Can be an input or output.

Thermal Pad

—

The thermal pad is not connected internally. No requirement to solder this pad, if connected it

is recommended that the pad be left floating or tied to GND

(1)

I = input, O = output, I/O = input or output, P = power, NC = no connection.

(2)

For what to do with unused pins, refer to Section 8.4.

www.ti.com

TMUX7201, TMUX7202

SCDS443A – OCTOBER 2022 – REVISED MARCH 2023

Submit Document Feedback

Product Folder Links: TMUX7201 TMUX7202

TMUX7201 Scheda tecnica(PDF) 3 Page - Texas Instruments

TMUX7201 Scheda tecnica(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Scheda tecnica Scarica

Link URL