| Motore di ricerca datesheet componenti elettronici |
|
LMV951 Scheda tecnica(PDF) 16 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
LMV951 Scheda tecnica(HTML) 16 Page - National Semiconductor (TI) |
|
16 / 17 page ![]() Application Information (Continued) The power supply of 3V is recommended to power this system. A1 and A2 are set up as unity gain buffers. It is easy to configure A1 with the required gain if a gain of greater than one is required. C 1 along with R1 and R2 are used to ensure the correct DC operating point at the input of A1. C 4 along with R 5 and R6 are used to setup the correct DC operating point for A2. C 1,C3, and C4 have been selected to give about a 20% droop with a 1 kHz square wave input. 20123157 FIGURE 5. Two Wire Line Driver 20123159 FIGURE 6. 25 kHz Through 1000 ft. 20123158 FIGURE 7. 200 kHz Through 50 ft. www.national.com 16 |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |