MS01A10-32SW datasheet(2/25 Pages) ITT

2 / 25 page

A-39

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

KPSE High performance crimp contact connectors

KPSE High performance crimp

contact connectors

• High performance

• Crimp termination

• Closed entry socket contacts

Series KPSE environmental, miniature circu-

lar,

quick

disconnect

connectors

are

designed for the exacting requirements of

today’s electronic industry.

They are intermateable, intermountable and

interchangeable with all connectors manu-

factured acc. to MIL-C-26482 and VG95328.

1 Standard MIL-C-26482 mates with any

connector designed to MIL-C-26482 and

VG 95328.

2 Crimp, snap-in contacts are designed to MIL-C-

39029 and can be crimped with the standard

M22520/1 crimp tool.

Closed-entry socket contacts eliminate dam-

age from abuse by test probes and

help to correct any misaligned pins during

engagement

Contact insertion is accomplished from the

rear of the connector. When the contact is fully

inserted, the clip tines snap securely behind the

contact shoulder.

Contact extraction is accomplished with a

front-inserted tool. Pressing the tool plunger

pushes the contact out through

the rear of the connector.

3 Monobloc insulator does not leave any access

to moisture and avoids interfacial empty space.

4 Contact retaining clip is completely encased in

a tough plastic wafer to protect the clip from

damage

Complete moisture sealing is achieved by

combining four seals: shell, peripheral, interfa-

cial and wire seals

Shell Seal is effected when the plug shell push-

es against the sealing ring in the

receptacle when the connectors are mated.

Peripheral Seal around the edge of the pin

insulator is designed so that mating the connec-

tor puts tension on the seal and greatly reduces

compression set.

Interfacial Seal is achieved by the insutor faces

meeting when the plug and receptacle are

mated.

Wire Seal is accomplished by a multiple ripple

design, exceeding the wire sealing requirements

of MIL-C-26482.

5 Positive insert-to-shell mechanical retention

with hard plastic wafer firmly locked into a

groove in the shell, in addition to a strong

adhesive bond between the insert and shell.

Cannon KPT/KPSE

MIL-C-26482 Series I Connectors

ca_A1-A163.qxd:Layout 1

2/9/11

7:49 PM

Page 39

MS01A10-32SW Scheda tecnica(PDF) 2 Page - ITT Industries

MS01A10-32SW Scheda tecnica(HTML) 2 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Scheda tecnica Scarica

Link URL