uPI Semiconductor Corp., http://www.upi-semi.com

Rev. F03, File Name: uP6281-DS-F0300

uP6281

6

Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device.

These are for stress ratings. Functional operation of the device at these or any other conditions beyond those

indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum

rating conditions for extended periods may remain possibility to affect device reliability.

Note 2. Devices are ESD sensitive. Handling precaution recommended.

Note 3.

θ

JA is measured in the natural convection at TA = 25°C on a low effective thermal conductivity test board of

JEDEC 51-3 thermal measurement standard.

Note 4. The device is not guaranteed to function outside its operating conditions.

Electrical Characteristics

OD#

UGATE or

LGATE

TPDLDOD#

TPDHDOD#

90%

10%

PWM

TPDLLGATE

TPDHLGATE

TPDLUGATE

TPDHUGATE

TFLGATE

TRUGATE

TFUGATE

TRLGATE

LGATE

UGATE