16245 Vineyard Blvd, Morgan Hill, CA 95037

Phone: (408) 919-0200 Fax: (408) 919-0201

Email: sales@linengineering.com

Email: techsupport@linengineering.com

www.linengineering.com

R710

R710

STEPPER DRIVER

FEATURES AND BENEFITS

• Built-in step pulse multiplier 1, 2, 5, and 10

• Common Ground or Common +5 Volts Input

Option Available

• Input Voltage of +12 to 80 VDC

• Phase Current Ranges from 0.3 to 7.0 Amps

Peak

• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64,

1/128, 1/256

• RS485 Communication with Optional Con-

verter Cards Available

• 2 User Con:gurable Digital I/O

• 2 Dedicated InputsH 1 Optical Sensor for

yoming, 1 Switch Closure to Ground

• FullM Programmable Ramps and Speeds

• Software Selectable yold and  ove Currents

• Stand Alone Operation with No Connection to

PC

• Stores up to 16 Different Programs at Once

with 4 kBMtes of  em

OPTIONS

ADJUSTABLE TRIMPOT

The potentiometer shown on the board can be rotated using a screwdriver. It’s recommended to rotate the motor at 0.25 RPS.

Then to adjust the potentiometer until there is the least amount of vibration and noise coming out of the motor. This will be

the position that the driver will perform smoothly with a given motor and power supply voltage.

The adjustment will alter the current waveform coming out of the driver and into the motor coils.