MCP2120 datasheet(13/34 Pages) MICROCHIP

13 / 34 page

 2004 Microchip Technology Inc.

Preliminary

DS21894B-page 13

MCP2122

4.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings†

Ambient Temperature under bias........................................................................................................... –40°C to +125°C

Storage Temperature ............................................................................................................................. –65°C to +150°C

Voltage on VDD with respect to VSS .......................................................................................................... –0.3V to +6.5V

Voltage on RESET with respect to VSS ..................................................................................................... –0.3V to +14V

Voltage on all other pins with respect to VSS ................................................................................. –0.3V to (VDD + 0.3V)

Total Power Dissipation (1) ...................................................................................................................................800 mW

Max. Current out of VSS pin ..................................................................................................................................500 mA

Max. Current into VDD pin .....................................................................................................................................500 mA

Input Clamp Current, IIK (VI < 0 or VI > VDD)

................................................................................................................... ±20 mA

Output Clamp Current, IOK (V0 < 0 or V0 > VDD)

............................................................................................................. ±20 mA

Max. Output Current sunk by any Output pin..........................................................................................................25 mA

Max. Output Current sourced by any Output pin.....................................................................................................25 mA

Note 1: Power Dissipation is calculated as follows:

PDIS = VDD x {IDD –

∑ IOH} + ∑ {(VDD – VOH) x IOH} + ∑(VOL x IOL)

†NOTICE: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This

is a stress rating only and functional operation of the device at those or any other conditions above those indicated in

the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods

may affect device reliability.

MCP2120 Scheda tecnica(PDF) 13 Page - Microchip Technology

MCP2120 Scheda tecnica(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Scheda tecnica Scarica

Link URL