74LV393

Dual 4-bit binary ripple counter

Rev. 6 — 19 March 2021

Product data sheet

1. General description

The 74LV393 is a dual 4-stage binary ripple counter. Each counter features a clock input (nCP), an

overriding asynchronous master reset input (nMR) and 4 buffered parallel outputs (nQ0 to nQ3).

The counter advances on the HIGH-to-LOW transition of nCP. A HIGH on nMR clears the counter

stages and forces the outputs LOW, independent of the state of nCP. Inputs include clamp diodes.

This enables the use of current limiting resistors to interface inputs to voltages in excess VCC.

2. Features and benefits

• Optimized for low voltage applications: 1.0 V to 3.6 V

• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V

• Typical VOLP (output ground bounce) 0.8 V at VCC = 3.3 V, Tamb = 25 °C

• Typical VOHV (output VOH undershoot) 2 V at VCC = 3.3 V, Tamb = 25 °C

• Two 4-bit binary counters with individual clocks

• Divide-by any binary module up to 28 in one package

• Two master resets to clear each 4-bit counter individually

• Complies with JEDEC standard no. 7A

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

3. Ordering information

Table 1. Ordering information

Package

Type number

Temperature range Name

Description

Version

74LV393D

-40 °C to +125 °C

SO14

plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

74LV393PW

-40 °C to +125 °C

TSSOP14 plastic thin shrink small outline package; 14 leads;

body width 4.4 mm

SOT402-1