PRINTED IN CANADA

Copyright © Greystone Energy Systems Inc. All Rights Reserved

www.greystoneenergy.com

PS-CSGNG200XXX-02-01

11/19

Greystone Energy Systems, Inc.

150 English Drive, Moncton,

New Brunswick, Canada E1E 4G7

Ph: +1 (506) 853-3057 Fax: +1 (506) 853-6014

North America: 1-800-561-5611

E-mail: mail@greystoneenergy.com

AC CURRENT SWITCHES HIGH OUTPUT WITH TIME DELAY

CS-425-HC

PRODUCT DESCRIPTION

The CS-425-HC products are solid-state current

switches with N.O. triac outputs to control high-

current line-voltage AC loads. All models have a

factory set trip level of approximately 1 Amp and

require no field adjustment for easy installation.

Internal circuits are powered by induction from

the line being monitored and all models are cULu

certified.

The CS-425-HC series can operate a dryer booster

fan directly. These devices sense when a clothes

dryer is drawing 1 Amp of current and then closes

the output switch to activate the dryer vent booster

fan. When the dryer cycle is complete and the

current drops below the threshold, the output

switch will remain closed for a pre-set delay time

to allow heat to be removed from the vent before

the switch is opened again. The device output can

switch 120 Vac loads up to 2.5 Amps.

TYPICAL INSTALLATION

For complete installation and wiring details,

please refer to the product installation

instructions.

PRODUCT

CS-425-HC-

AC Current Switches High Output

TIME DELAY

0

5

10

15

None

5 minutes

10 minutes

15 minutes

ORDERING

CS-425-HC-

PART NUMBER

NOTE: Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice.

MAXIMUM CORE CURRENT

50 Amps

OPERATING TEMPERATURE

0 to 40°C (32 to 104°F)

TRIP SET-POINT

Approximately 1 Amps

ENCLOSURE SIZE

49mm H 87mm W x 25mm D (1.95” x 3.45” x 1”)

AC CONDUCTOR HOLE

20mm (0.8”) diameter

SWITCH RATING

120 Vac @ 2.5 Amps maximum

SWITCH TYPE

Solid-state triac

OFF-STATE LEAKAGE

<1 mA

TURN ON TIME / TURN OFF TIME

<200 mS 0, 5, 10 or 15 minutes

OPERATING HUMIDITY

0 to 95 %RH non-condensing

MATERIAL

ABS, UL94-V0, Insulation class 600V

MOUNTING HOLES

2 x 5 mm holes spaced 76mm on base (2 x 0.19” holes spaced 3” on base)

AGENCY APPROVALS

cULus listed

SPECIFICATIONS

49mm

1.95”

87mm

3.45”

20mm

0.8”

67.2mm

3”

ø5mm (x2)

0.8”

RELAY

Power

Source

RELAY