CS5535 datasheet(79/555 Pages) NSC

79 / 555 page

Revision 0.8

www.national.com

GLPCI_SB Functional Description (Continued)

4.2.14 CPU Interface Serial (CIS)

The CIS provides the system interface between the

CS5535 and GX2. The interface supports several modes to

send different combinations of 16-bit side-band signals

through the CIS signal (ball P3). The sideband signals are

synchronized to the PCI clock through 2-stage latching.

Whenever at least one of 16 signals is changed, the serial

transfer (using the PCI clock) immediately starts to send

the information from the South Bridge to the North Bridge.

But, if any bit changes within 20 clocks of any previous

change, the later change will not be transmitted during the

transfer. Another transfer will start immediately after the

conclusion of the transfer due to the subsequent change.

There are three modes of operation for the CIS signal (ball

P3). Note that the transmitted polarity may be different than

the “generally defined” polarity state:

• Mode A - Non-serialized mode with CIS equivalent to

SUSP# (reset mode). Not used in normal operation.

• Mode B - Serialized mode with signals SUSP#, NMI,

Sleep, and Delayed Sleep. Not used in normal opera-

tion.

• Mode C - Serialized mode with Mode B signals plus

ASMI, and INTR. Used in normal operation.

If the GLPCI_MSR_CTRL bit HCD (MSR 51000010h[9]) is

set, any in-bound transaction, except in-bound memory

writes, will be held for any CIS transfer to complete before

claiming completion.

Mode selection is programmed in the GLPCI_MSR_CTRL,

bits [4:3] (MSR 51000010h).

Table 4-3 lists the serial data with corresponding side-band

signals. The serial shift register takes the selected side-

band signals as inputs. The signal SMI is the ORed result

of the SSMI_ASMI_FLAG (SSMI Received Event) bit in

GLPCI_SB GLD_MSR_SMI (MSR 51000002h[18]) and the

side-band signal ASMI. It also serves as a direct output to

the processor.

Table 4-3. CIS Serial Bits Assignment and Descriptions

Bit Position

Mode B

Mode C

Comment

start_0

Start Bit 0

start_1

Start Bit 1

data 00

Reserved

data 01

Reserved

data 02

SUSP

Sleep Request

data 03

NMI#

Non-Maskable Interrupt

data 04

Sleep#

Power Management Input Disable

data 05

Delayed Sleep#

Power Management Output Disable

data 06

ASMI#

ASMI or SSMI

data 07

INTR#

Maskable Interrupt out

data 08

Reserved

data 09

Reserved

data 10

Reserved

data 11

Reserved

data 12

Reserved

data 13

Reserved

data 14

Reserved

data 15

Reserved

stop_0

Stop Bit 0

stop_1

Stop Bit 1

Note:

Mode A is not listed since it is a non-serialized mode with CIS equivalent to SUSP# (reset mode).

CS5535 Scheda tecnica(PDF) 79 Page - National Semiconductor (TI)

CS5535 Scheda tecnica(HTML) 79 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL