OVS9WBCR4 datasheet(2/6 Pages) OPTEK

2 / 6 page

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

Issue A .1

11/06

Page 2 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

White PLCC2 Surface Mount LED

OVS9WBCR4

Electrical Characteristics

TA = 25

o C unless otherwise noted

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

CONDITIONS

Luminous Intensity

560

750

1125

mcd

IF = 20 mA

Forward Voltage

2.9

3.2

3.8

IF = 20 mA

Reverse Current

----

µA

VR = 5 V

2 Θ½

50% Power Angle

----

120

----

deg

IF = 20 mA

Chromaticity

Coordinates

----

0.3150

----

IF = 20 mA

----

0.3354

----

IF = 20 mA

Absolute Maximum Ratings

TA = 25

o C unless otherwise noted

Storage Temperature Range

-40 ~ +100°C

Operating Temperature Range

-40 ~ +100°C

Soldering Temperature (10 - 30 seconds maximum)

260°C

Reverse Voltage

5 V

Continuous Forward Current

20 mA

Peak Forward Current (TP ≤ 10 µs, Duty Cycle = 0.005)

200 mA

LED Junction Temperature

125°C

Electrostatic Discharge (ESD Threshold [HBM])

2000 V

Power Dissipation (at room temperature)

85 mW

Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. Pb content <1000 PPM.

3. To designate luminous intensity ranks or chromaticity bins, please contact OPTEK.

4. Part is sensitive to static electricity and precautions must be used when handling products.

Standard Bins (I

F = 20 mA)

Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown.

Orders for OVS9WBCR4 may be filled with any or all bins contained as below.

Luminous Intensity (mcd)

1125

900

715

560

OVS9WBCR4 Scheda tecnica(PDF) 2 Page - OPTEK Technologies

OVS9WBCR4 Scheda tecnica(HTML) 2 Page - OPTEK Technologies

Html Pages

1 2 3 4 5 6

Scheda tecnica Scarica

Link URL