The Specialist In Drum Handling Equipment

201 Series

Wheeled Portable Drum Rollers

morsedrum.com

Copyright 2023 - Morse Mfg. Co., Inc.

Spec Sheet F201

(Updated 20 Jun, 2023)

3

D

F

E

D. Extend tipping lever (1) fully and push toward

drum. Engage chine hook (2) on top rim of drum

E. To raise kickstand (9), push tipping lever (1)

toward drum to allow kick stand to clear the floor.

Then pull yellow release handle (11)

F. Pull fully extended tipping lever (1) to tilt drum

roller over to horizontal rolling position

G. Move drum roller into enclosure with interlock,

connect power (8) and turn on

H. Once rolling is complete, turn off drum roller,

disconnect power (8) and remove drum roller

from enclosure

I. Extend tipping lever (1) and engage chine hook

(2) on top rim of drum

J. Tilt drum roller back to upright and pull

kickstand (9) with foot to support drum roller in

upright position

K. Remove upright drum with drum truck or

below-hook drum lifter

Steps To Use Morse Portable Drum Rollers (continued from page 2)

G