| Motore di ricerca datesheet componenti elettronici |
|
AAT2803 Scheda tecnica(PDF) 4 Page - Advanced Analog Technology, Inc. |
|
|
|||||||||||||||||||||||||||||
AAT2803 Scheda tecnica(HTML) 4 Page - Advanced Analog Technology, Inc. |
|
4 / 16 page ![]() Electrical Characteristics1 VIN = 3.6V, CIN = COUT = C1 = C2 = C3 = 1.0μF; TA = -40°C to +85°C, unless otherwise noted. Typical values are TA = 25°C. Symbol Description Conditions Min Typ Max Units VIN Operation Range 2.7 5.5 V 1X Mode, 3.0 ≤ VIN ≤ 5.5, Active, 0.3 1 No Load Current; EN/SET = VIN; EN_FL= GND 1.5X Mode, 3.0 ≤ VIN ≤ 5.5, Active, 1.0 3.0 No Load Current; EN/SET = VIN; EN_FL= GND mA ICC Operating Current 2X Mode, 3.0 ≤ VIN ≤ 5.5, Active, 2.0 3.7 No Load Current; EN/SET = VIN; EN_FL = GND VOUT_FLASH = 5V; EN/SET = GND; 2.0 4.5 EN_FL = VIN 50μA Setting, 1X Mode; EN/SET 50 μA = VIN; EN_FL = GND ISHDN Shutdown Current EN/SET = 0 1.0 μA IDX ISINK Average Current Accuracy2 ISET = 30mA, TA = 25°C 27 30 33 mA ISET = 4.1mA, TA = 25°C 3.69 4.1 4.51 I(D-Match) Current Matching Between Any VF:D1:D4 = 3.6V 0.5 % Two Current Sink Inputs3, 4 VTH 1X to 1.5X or 1.5X to 2X Transition 150 mV Threshold at Any DX Pin VOUT Output Voltage (Flash Charge 3.0< VIN < 5V, IOUT = 120mA; 4.3 4.5 4.7 V Pump)5 EN_FL = VIN Max Continuous Output Current VIN = 3.3V; VOUT = 4.5V; 120 IOUT (Flash Charge Pump)5 EN_FL = VIN mA Max Pulsed Output Current5 VIN = 3.6V; VOUT = 4.5V; 300 IPULSED = 250ms TSS Soft-Start Time Backlight Charge Pump 100 μs Flash Charge Pump 200 FCLK Clock Frequency 1.0 MHz VEN(L) Enable Threshold Low VIN = 2.7V 0.4 V VEN(H) Enable Threshold High VIN = 5.5V 1.4 V AAT2803 Six-Channel White LED Backlight Charge Pump with Flash 4 2803.2006.12.1.6 1. The AAT2803 is guaranteed to meet performance specifications over the -40°C to +85°C operating temperature range and is assured by design, characterization, and correlation with statistical process controls. 2. Determined by the average of all active channels. 3. Current matching is defined as the deviation of any sink current from the average of all active channels. 4. Specification applies only to the tri-mode charge pump. 5. Specification applies only to the charge pump doubler. |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |