AM29LV320MT_07 datasheet(21/63 Pages) SPANSION

21 / 63 page

26518C3 January 31, 2007

Am29LV320MT/B

D A TA

SH EE T

If the system asserts V

IH on the WP#/ACC pin, the de-

vice reverts to whether the top or bottom two sectors

were previously set to be protected or unprotected

using the method described in Sector Group Protec-

tion and Unprotection. Note: No external pullup is nec-

essary since the WP#/ACC pin has internal pullup to

Temporary Sector Group Unprotect

(Note: In this device, a sector group consists of four adjacent

sectors that are protected or unprotected at the same time

(see Table 6).

This feature allows temporary unprotection of previ-

ously protected sector groups to change data in-sys-

tem. The Sector Group Unprotect mode is activated by

setting the RESET# pin to V

ID. During this mode, for-

merly protected sector groups can be programmed or

erased by selecting the sector group addresses. Once

ID is removed from the RESET# pin, all the previously

protected sector groups are protected again. Figure 1

shows the algorithm, and Figure 23 shows the timing

diagrams, for this feature.

Figure 1.

Temporary Sector Group

Unprotect Operation

START

Perform Erase or

Program Operations

RESET# = V

Temporary Sector

Group Unprotect

Completed (Note 2)

RESET# = V

(Note 1)

Notes:

1. All protected sector groups unprotected (If WP# = V

IL,

the first or last sector will remain protected).

2. All previously protected sector groups are protected

once again.

AM29LV320MT Scheda tecnica(PDF) 21 Page - SPANSION

AM29LV320MT Scheda tecnica(HTML) 21 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Scheda tecnica Scarica

Link URL