Datasheet EE310

v2.7 / Modification rights reserved | 4

Features

The E+E proprietary sensor coating is a protective layer applied to the sensing elements, their leads and soldering points.

The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment

(salts, off-shore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by

preventing stray impedance caused by deposits on the active sensor surface or on the electrical connections.

Protective Sensor Coating

Dimensions

Values in mm (inch)

Enclosure

Polycarbonate

Stainless steel

71 (2.80)

5.1 (0.20)

180 (7.09)

166 (6.54)

153 (6.02)

73 (2.87)

5.1 (0.20)

218 (8.58)

200 (7.87)

186 (7.32)

Types

T1: Wall mount

T5: Remote probe up to 180 °C (356 °F)

code “probe length”1)

code „cable length“1)

L2)

15

T2: Duct mount

T10: Pressure tight probe up to 20 bar (300 psi)

200 (7.87)

L2)

code “cable length“1)

200 (7.87)

adjustable

min. 23 (1) / max. 164 (6.5)

L2)

1/2" ISO or

1/2" NPT

15 (0.60)

T24: T only remote probe (M3)

150 (5.9)

code “cable length”1)

1/2" ISO or

1/2" NPT*)

1) Refer to ordering guide

2) L = filter length; refer to data sheet Accessories

*) Not included in the scope of supply:

1/2" ISO ∅ 6 mm

HA011104

1/2" NPT ∅ 6 mm

HA011105