Clamp Meter PCE-PCM 3

Clamp meter PCE-PCM 3

Digital multimeter for single-phase measurement / NCV measurement / W / VA / Var /Inrush Current / 1000 A AC Current

Measurement / Bluetooth Interface / Frequency Measurement / Backlight / Voltage measurement / 750 kW power 

With the digital multimeter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be

measured with the digital multimeter. Thus, with the power current clamp, apparent power, reactive power and active power measurements up

to 750 KW are possible. Another function of the digital multimeter is the measurement of the inrush current. Many consumers have a

tremendously high current at the moment of switch-on. With a conventional digital multimeter such a measurement is not possible. For the

digital multimeter this is not a problem.

With the NCV (Not Connected Voltage) function of the digital multimeter, it can be checked whether a voltage is applied to a line without

performing a contacting measurement. This makes the work much easier for the user thanks to the digital multimeter. In addition to the

measuring function, the digital multimeter can also be connected to a terminal via the Bluetooth interface. Via this Bluetooth interface, the

measured data can be transmitted directly from the digital multimeter to the terminal, where it can be logged, analyzed and sent.

Apparent / active / reactive power

Measurement up to the 20th harmonic

"Not Connected Voltage" function

Inrush current measurement

Current measurement up to 1000 A AC

Bluetooth interface