| Motore di ricerca datesheet componenti elettronici |
|
SP6682 Scheda tecnica(PDF) 2 Page - Sipex Corporation |
|
|
|||||||||||||||||||||||||||||
SP6682 Scheda tecnica(HTML) 2 Page - Sipex Corporation |
|
2 / 12 page ![]() 2 Date: 7/1 9/06 Rev D SP6682 High Efficiency Charge Pump Regulator for White LEDs © 2006 Sipex Corporation PARAMETER MIN TYP MAX UNITS CONDITIONS Input Voltage 2.7 5.5 V Quiescent Current 1.2 3 mA VIN = 4.2V, VOUT = 3.6V, IOUT = 100µA Shutdown Current 1.5 µ A EN/PWM = 0.0V, VIN = 5.5V Oscillator Frequency 0.42 0.60 0.78 MHz VIN = 3.6V VFB Reference Voltage 0.275 0.306 0.337 V Charge Pump Output 11 18 �� FB = 0.0V, VIN = 3.6V, Resistance IOUT = 20mA, VMODE = High VMODE Threshold Voltage 1.15 1.25 1.35 V VIN Falling @ 25°C Hysteresis for Mode Transition 30 mVPP VIN = 3.6V @ 25°C Voltage VMODE Pin Current 0.01 0.5 µ A VMODE = 1.25 EN/PWM Logic Low 0.4 V EN/PWM Logic High 1.6 V EN/PWM Pin Current 0.01 0.5 µ A VEN/PWM = 4.2V FB Pin Current 0.5 µ A VFB = 1V VOUT Turn-On Time 175 500 µ s VIN = 3.6V, FB within 90% regulation ELECTRICAL CHARACTERISTICS Unless otherwise specified: VIN =+2.7V to +5.0V, C1=C2=C4=C5=2.2µF (ceramic, ESR=0.03�), C3=0.1µF (ceramic) and TAMB =-40°C to +85°C unless otherwise noted. VIN, VMODE, VOUT and EN/PWM.................-0.3V to 6V VIN - VOUT ........................................................... 0.7V Output Current (IOUT) ...................................... 300mA Power Dissipation per Package - 10-pin MSOP (derate 8.84mW/°C above +70°C) ................. 720mW Junction Temperature .................................... +125°C Storage Temperature ...................... -65°C to +150°C ESD Rating. ................................................ 2kV HBM These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. ABSOLUTE MAXIMUM RATINGS TYPICAL APPLICATION SCHEMATIC CAMERA FLASH APPLICATION Rfb 1.5 Ohm Iout=200mA for 1W LED ENABLE/PWM LEDA C4 2.2uF 1W LED C5 2.2uF SP6682 Vout 1 C1P 2 C2N 7 EN/PWM 6 FB 5 Vmode 4 Vin 3 GND 8 C1N 9 C2P 10 Vin: 3.0-4.2V C1 2.2uF R3 1.0M LEDK VFB=300mV |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |