TC2684 datasheet(4/10 Pages) MICROCHIP

4 / 10 page

TC2682/TC2683/TC2684

DS21548C-page 4

3.0

DETAILED DESCRIPTION

The TC2682/TC2683/TC2684 inverting charge pumps

perform a -2x multiplication of the voltage applied to the

VIN pin. Conversion is performed using two

synchronous switching matrices and three external

capacitors.

Figure 3-1 is a block diagram representation of the

TC2682/TC2683/TC2684 architecture. The first switch-

ing stage inverts the voltage present at VIN and the

second stage uses the ‘-VIN’ output generated from the

first stage to produce the ‘-2X’ output function from the

second stage switching matrix.

Each device contains an on-board oscillator that

synchronously controls the operation of the charge

pump switching matrices. The TC2682 synchronously

switches

12kHz,

the

TC2683

synchronously

switches at 35kHz, and the TC2684 synchronously

switches at 125kHz. The different oscillator frequencies

for this device family allow the user to trade-off

capacitor size versus supply current. Faster oscillators

can use smaller external capacitors, but will consume

supply

current

(see

Section 1.0

Electrical

Characteristics).

FIGURE 3-1:

TC2682/TC2683/TC2684 ARCHITECTURE

VOUT = -2VIN

-VIN

COUT

VIN

Switch Matrix

(1st Stage)

Switch Matrix

(2nd Stage)

Oscillator

TC2684 Scheda tecnica(PDF) 4 Page - Microchip Technology

TC2684 Scheda tecnica(HTML) 4 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10

Scheda tecnica Scarica

Link URL