Tel:886-2-66296288

Fax:886-2-29174598

URL:http://www.princeton.com.tw

PT2256V V1.2

- 16 -

August, 2006

Electronic Volume Controller IC

PT2256V

Notes:

1.

Dimensioning and tolerancing per ANSI Y14.5M-1982.

2.

Dimension “D” does not include mold flash, protrusions or gate burrs. Mold Flash,

protrusion or gate burrs shall not exceed 0.15 mm (0.006 in) per side.

3.

Dimension “E” does not include interlead flash or protrusions. Interlead flash or

protrusions shall not exceed 0.25 mm (0.010 in) per side.

4.

The chamfer on the body is optional. It is not present, a visual index feature must be

located within the crosshatched area.

5.

“L” is the length of the terminal for soldering to a substrate.

6.

N is the number of the terminal positions (N=16)

7.

The lead width “B” as measured 0.36 mm (0.014 in) or greater above the seating

plane, shall not exceed a maximum value of 0.61 mm (0.24 in).

8.

Controlling dimension : MILLIMETER.

9.

Refer to JEDEC MS-013, Variation AA.

JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.