Data Sheet

ADL8107

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

analog.com

Rev. B | 6 of 23

Figure 2. Pin Configuration

Table 8. Pin Function Descriptions

Pin No.

Mnemonic

Description

1

RBIAS

Bias Setting Resistor. Connect a resistor between RBIAS and VDD to set the IDQ. See Figure 79 and Table 9 for more details. See

Figure 3 for the interface schematic.

2, 4, 5, 7

GND

Ground. Connect the GND pins to a ground plane that has low electrical and thermal impedance. See Figure 6 for the interface

schematic.

3

RFIN

RF Input. The RFIN pin is ac-coupled and matched to 50 Ω. See Figure 4 for the interface schematic.

6

RFOUT

RF Output. The RFOUT pin is ac-coupled and matched to 50 Ω. See Figure 5 for the interface schematic.

8

VDD

Drain Bias. Connect the VDD pin to the supply voltage. See Figure 5 for the interface schematic.

GROUND

PADDLE

Exposed Paddle. Connect the exposed paddle to a ground plane that has low electrical and thermal impedance.

INTERFACE SCHEMATICS

Figure 3. RBIAS Interface Schematic

Figure 4. RFIN Interface Schematic

Figure 5. VDD and RFOUT Interface Schematic

Figure 6. GND Interface Schematic