UM-GP-005

Advanced Analog GreenPAK Evaluation Board

User Manual

Revision 1.2

21-Mar-2022

CFR0012

12 of 21

© 2022 Renesas Electronics Corporation

2. Connect the GreenPAK ADB to your computer with the included USB cable.

3. Attach the expansion connector on the GreenPAK ADB to the SV1 header on the SLG47004

evaluation board.

4.

Open the “Debug” tool within the GreenPAK Designer software and select the “GreenPAK

Advanced Development Platform

”. If this window does not appear, click the “Change Platform”

button in the “Debugging Controls” window.

Figure 2: Development Platform Selector

5.

Change the “Device:” dropdown selection to the appropriate I2C control code. By default, all

SLG47004 devices are configured with a control code of 0001 which corresponds to the

“External:

0001” option in the list.

6.

Select “Ext. VDD” or “Va” to connect the GreenPAK ADB’s VDD signal generator to the evaluation

board. Note that this step should be skipped when using another voltage source to power the

evaluation board.

7.

Click the “Emulation” or “Program” buttons to load the GreenPAK Designer’s current configuration

onto the SLG47004 device.

Figure 3

shows the baseline configuration for the “Debugging Controls” window while emulation is

running. Additional connections from the GreenPAK ADB to the SLG47004 can be made by enabling

the expansion connector switches for the desired pin.

Figure 3: GreenPAK ADB Debugging Controls Window

For more information on configuring the function generators, enabling the expansion connector

switches, and working with the GreenPAK Designer software, please refer to the GreenPAK Designer

software and the GreenPAK Advanced Development Platform user manuals.