MTLT335D

Triple-Redundant 1.3/h Dynamic Tilt Sensor with CAN Output

The ACEINNA MTLT335 is an easy-to-use high-performance 6-DOF IMU packaged in a rugged sealed over-molded plastic

housing. The MTLT335 includes triple-redundant 3-Axis MEMS accelerometers and rate gyros, which are fully calibrated

over the full operating temperature range. The processing power is provided by a 168MHz ARM M4 CPU with a Floating

Point Unit. An internal Kalman Filter provides gyro-compensated and corrected pitch and roll outputs with Excavator and

General Purpose modes. Excavator mode uses rotation as primary indicator for motion detection and general purpose

mode uses linear acceleration for motion detection. The MTLT335 has been developed in accordance with the ISO13849

Machine Safety standard, and fulfills the requirements of category 2 as specified in DIN EN ISO 13849-1:2016. It can be

used in safety functions up to Performance Level d as specified in DIN EN ISO 13849-1:2016.