NE5534, NE5534A, SA5534. SA5534A

LOW NOISE OPERATIONAL AMPLIFIERS

SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004

3

POST OFFICE BOX 655303

symbol

IN−

COMP/BAL

COMP

OUT

BALANCE

−

+

IN+

application circuit

−

+

22 k

Ω

100 k

Ω

7

2

3

VCC−

4

6

5

8

VCC+

1

CC

5534

Frequency Compensation and Offset-Voltage Nulling Circuit

22 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−22 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage either input (see Notes 1 and 2)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input current (see Note 3)

±10 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short circuit (see Note 4)

Unlimited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

97

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

P package

85

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PS package

95

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−.

2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage.

3. Excessive current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs, unless some

limiting resistance is used.

4. The output may be shorted to ground or to either power supply. Temperature and/or supply voltages must be limited to ensure the

maximum dissipation rating is not exceeded.

5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

6. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions

MIN

MAX

UNIT

VCC+

Supply voltage

5

15

V

VCC−

Supply voltage

−5

−15

V

TA

Operating free-air temperature range

NE5534, NE5534A

0

70

°C

TA

Operating free-air temperature range

SA5534, SA5534A

−40

85

°C