Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

PT2264 v1.0

- 16 -

June, 2004

Remote Control Encoder IC

PT2264

Notes：

1. Dimensioning and tolerancing per ANSI Y14.5M-1982.

2. Dimension〝D〞does not include mold flash, protrusions or gate burrs. Mold Flash, protrusion or gate

burrs shall not exceed 0.15 mm (0.006 in) per side.

3. Dimension〝E〞does not include interlead flash or protrusions. Interlead flash or protrusions shall not

exceed 0.25 mm (0.010 in) per side.

4. The chamfer on the body is optional. It is not present, a visual index feature must be located within

the crosshatched area.

5.〝L〞is the length of the terminal for soldering to a substrate.

6. N is the number of the terminal positions (N=18)

7. The lead width〝B〞as measured 0.36 mm (0.014 in) or greater above the seating plane, shall not

exceed a maximum value of 0.61 mm (0.24 in).

8. Controlling dimension：MILLIMETER.

9. Refer to JEDEC MS-013, Variation AB.

JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.