D-30

Safety Sensors / Components

±

Safety Photoelectric Switch

E3FS

Safety design for category 2.

Suitable for detecting human

bodies in hazardous area.

Main features

● The E3FS is a Type 2 Safety Single Beam intended to be

used with the control unit F3SP-U1P-TGR for the control

system of a machine to category 2, 1 or B as defined in the

European standard EN 954-1.

● Compliance with Machinery directive: No. 98/37/EC, EMC

Directive: No. 89/336/EEC, EN 61496-1 (06/98) (Type 2

ESPE), and IEC61496-2 (1997) (Type 2 Active

Optoelectronic Protection device).

● Approved by TÜV Product Service (Notified Body) as Type

2 ESPE (Electro-Sensitive-Protective-Equipment), Type 2

AOPD (Active Optoelectronic Protection device) and CE

marking.

● Pursuing safety with high level of safety design and FMEA.

● System configuration of up to four units is possible.

● With the control unit F3SP-U1P-TGR, two different muting

functions can be selected for each set of E3FS separately.

● Compact and space-saving (M18 DIN-sized threaded

cylindrical housing, axial type)

● Housing materials: plastic and nickel brass

● Connection: Pre-wired and M12 plug

● High enclosure ratings (IP67)

● Sensing distance 10m