Campbell Scientific, Inc. | 815 W 1800 N | Logan, Utah 84321-1784 | (435) 753-2342 | www.campbellsci.com

USA

|

AUSTRALIA

|

BRAZIL

|

CANADA

|

COSTA RICA

|

ENGLAND

|

FRANCE

|

GERMANY

|

SOUTH AFRICA

|

SPAIN

Required Concrete Pad

Dimensions (see note 2):

24 x 24 x 24 in. (61 x 61 x 61 cm)

Crossarm Height (attached to mast)

Standard:

10 ft (3 m)

Maximum (mast

fully extended):

~12 ft (3.7 m)

Minimum:

~9 ft (2.7 m)

Wind Load Recommendation

(see note 3):

110 mph maximum

Pipes Outer Diameter (OD)

Vertical:

1 in. (2.5 cm)

Cross Support:

0.375 in. (0.953 cm)

Leg Spacing:

10.25 in. (26 cm) between legs

(center to center)

Material:

Aluminum

Shipping Weight:

40 lbs (18 kg)

Notes:

1. Refer to the "Instrumentation Mounts" product brochure for crossarm, solar radiation mounts, and radiation shield options.

2. The concrete pad requirements assume heavy soil; light, shifting, or sandy soils require a larger concrete pad.

3. The wind load recommendation assumes proper installation, proper anchoring, adequate soil, and total instrument projected area of less

than 2 square feet. The amount of wind load that this mount can withstand is affected by quality of anchoring and installation, soil type,

and the number, type, and location of instruments fastened to the UT10.

Copyright © 1993, 2010

Campbell Scientific, Inc.

Printed July 28, 2010

Specifications

HMP45C-L6 Temperature and RH Probe

housed in a Radiation Shield

5-ft Grounding Rod (included w/UT10)

Hinged Base (included w/UT10)

User-supplied Concrete Pad

Wind Sentry Set

Crossarm

Lightning Rod (included w/UT10)

TE525-L50 Tipping Bucket Rain Gage

Solar Panel

LI200X Pyranometer,

Pyranometer Crossarm Stand,

LI2003S Pyranometer Base and Leveling Fixture

Environmental Enclosure

Anchor Bolts (included w/UT10)

Anchor Bolt (included w/UT10)