www.sensata.com

Copyright © 2019 Sensata Technologies, Inc.

Page 2

MECHANICAL

Package dimensions are

114.4 mm high by 99 mm

wide by 22.5 mm thick. The

package mounts to a DIN

rail type EN 50 022 (35mm

X 7.5mm). A length of DIN

rail is supplied with each

module. The module simply

snaps directly to the DIN rail

and is ready to use.

CONNECTION INSTRUCTIONS #1

Differential Line Driver

Encoder signals from 5 VDC to 24 VDC (must specify the voltage when ordering)

This is the preferred type of encoder output as it has the best noise immunity. Connect

each encoder signal to its like optical isolator input (A to A, A/ to A/, etc).

Figure 1

Standard Connection

with Differential Line Driver