-

DESCRIPTION

Handy for making wire harnesses or jumpering between headers on PCB's. These

premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces

of each of ten rainbow colors). They have 0.1" male header contacts on either end

and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The

best part is they come in a 40-pin ribbon cable. You can always pull the ribbon

wires off to make individual jumpers, or keep them together to make neatly

organized wire harnesses.

We have these in three handy lengths: 3"/75mm, 6"/160mm and 12"/300mm. If

you want the female/female type, we have those too!

For best results, when plugging these in a line, have the sides with the 'silver latch

bit' sticking out since that side is a tiny bit wider than 0.1"

Page 2 of 2

7/16/2015

http://www.adafruit.com/products/760