Kelvin Clip

PRODUCT ID: 3313



Description

Kelvin clips are used whenever you need to get a measurement right at the contact points of a circuit or

component. Even though these are grippy clips, each side of the clip is electrically insulated. So you can

use it to grab onto a part (as seen above) and perform measurements. These can also be used in circuit if

needed.

The clip is bare and comes with two jaw contacts that are screwed into each side of the plastic clip. No

wires are included, but you can easily solder to the clip jaws.



Technical Details

Product Dimensions: 51.5mm x 25.0mm x 12.4mm / 2.0" x 1.0" x 0.5"

Product Weight: 5.5g / 0.2oz

                                Engineered in NYC Adafruit ® https://www.adafruit.com/product/3313 5‐19‐17