STM32L452VCU6 datasheet(97/210 Pages) STMICROELECTRONICS

Il numero della parte	STM32L452VCU6

Spiegazioni elettronici	Ultra-low-power ARM® Cortex®-M4 32-bit MCUFPU, 100DMIPS, up to 512KB Flash, 160KB SRAM, analog, audio, ext. SMPS

PDF	210 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

97 / 210 page

DocID029968 Rev 3

97/210

STM32L452xx

Electrical characteristics

186

6.3.5

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 16: Current consumption

measurement scheme with and without external SMPS power supply.

Typical and maximum current consumption

The MCU is placed under the following conditions:

•

All I/O pins are in analog input mode

•

All peripherals are disabled except when explicitly mentioned

•

The Flash memory access time is adjusted with the minimum wait states number,

depending on the fHCLK frequency (refer to the table “Number of wait states according

to CPU clock (HCLK) frequency” available in the RM0394 reference manual).

•

When the peripherals are enabled fPCLK = fHCLK

The parameters given in Table 27 to Table 50 are derived from tests performed under

ambient temperature and supply voltage conditions summarized in Table 23: General

operating conditions.

STM32L452VCU6 Scheda tecnica(PDF) 97 Page - STMicroelectronics