TLV702-Q1

GND

EN

IN

OUT

VIN

VOUT

On

Off

CIN

1 F

Ceramic

COUT

13

TLV702-Q1

www.ti.com

SLVSC35D – AUGUST 2013 – REVISED JULY 2019

Product Folder Links: TLV702-Q1

Submit Documentation Feedback

Copyright © 2013–2019, Texas Instruments Incorporated

8 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

8.1 Application Information

The TLV702-Q1 belongs to a new family of next-generation value LDO regulators. These devices consume low

quiescent current and deliver excellent line and load transient performance. These characteristics, combined with

low noise and very good PSRR with little (VIN – VOUT) headroom, make this family of devices ideal for portable

RF applications. This family of regulators offers current limit and thermal protection, and is specified from –40°C

to +125°C.

8.2 Typical Application

Figure 24. Typical Application Circuit

8.2.1 Design Requirements

Table 2 lists the design parameters.

Table 2. Design Parameters

PARAMETER

DESIGN REQUIREMENT

Input voltage

2.5 V to 3.3 V

Output voltage

1.8 V

Output current

100 mA