www.element14.com

www.farnell.com

www.newark.com

www.cpc.co.uk

Page <1>

V1.0

14/02/18

USB 2.0 Active Repeater Cable

Description

This USB 2.0 Active Repeater Cable can easily extend your USB 2.0 cable of 5 meters; you can

even cascade up to 5 of these repeater cables for a maximum length of 25 meters. Compar-

ing with a “passive” repeater cable, our cable is an “active” one that buffers and regenerates

upstream and downstream signals to ensure signal reliability and performance. The USB 2.0

repeater cable support data transfer rates of up to 480Mbps and is fully backward compatible

with USB 1.1 devices. Therefore, both high speed and full speed (including low-speed) USB

devices/cables will function equally well with the USB repeater cable.

Application

To connect USB keyboard, Mouse, Camera, Printer, etc. with computer.

Features

• Active USB repeater cable, assuring signal quality and reliability

• Repeater cable length: 5 meter

• Connect to USB device or 2nd active repeater cable

• Up to 5 repeater cables can be cascaded to extend the distance

• Type A male to type A female

• USB Bus powered

• USB 2.0 and 1.1 compliant, works with both high, full and low speed USB devices

• Extend up to 25 meters by cascading up to 5 repeater cables

Specifications

Interface

: USB 2.0, backward compatible with USB 1.1

Data Transfer Rate

: 480/12/1.5 Mbps

Downstream Connector

: USB Type A Female

Upstream Connector

: USB Type A Male

Dimensions

: 84.3mm (L) × 54mm (W) × 17.8mm (H)

Cable Length

: 5 meter

Max. Units Cascaded

: 5

Regulatory Compliances

: FCC, CE

System Requirements

USB-enabled Windows or Mac (driver-free)

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted

for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any

error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any

assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the

Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.

pro-SIGNAL is the registered trademark of the Group. © Premier Farnell Limited 2016.

Part Number Table

Description

Part Number

Lead, USB 2.0, Repeater, 5m

PSG08427