| Motore di ricerca datesheet componenti elettronici |
|
DM300019 Scheda tecnica(PDF) 29 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DM300019 Scheda tecnica(HTML) 29 Page - Microchip Technology |
|
29 / 50 page ![]() dsPICDEM™ 80-PIN STARTER DEVELOPMENT BOARD USER’S GUIDE © 2006 Microchip Technology Inc. DS51584B-page 25 Chapter 3. Demonstration Program Operation 3.1 INTRODUCTION The dsPICDEM 80-Pin Starter Development Board is shipped with example applications programmed into the dsPIC DSC device. These examples exercise several of the dsPIC DSC peripherals such as the 12-bit Analog-to-Digital Converter (ADC) and UART interfaces. This chapter provides an overview of the demonstration code. Detailed information on the dsPICDEM 80-Pin Starter Development Board hardware is presented in Chapter 4. “dsPICDEM™ Development Board Hardware” and Appendix A. “Drawings and Schematics”. 3.2 HIGHLIGHTS Items discussed in this chapter are: • Demonstration Program Summary • Demonstration Code Operation •Board Self-test 3.3 DEMONSTRATION PROGRAM SUMMARY The preprogrammed demonstration program includes two functionally separate code modules: • Demonstration code module • Board self-test code module These two code modules have been combined into one composite program and coded into the device. The board self-test code module has been included on the CD as a library archive only and is briefly discussed at the end of this section. The following sections present the operation of each module. When power is applied to the dsPICDEM 80-Pin Starter Development Board, the dsPIC DSC device begins executing the demonstration program, which consists of three distinct functional tasks: • Interrupt processing • Analog-to-digital conversion • Digital-to-analog conversion 3.3.1 Interrupt Processing To illustrate interrupt processing, the demonstration program uses switches S1 and S2 as signals to drive LEDs RD4 and RD5 (output devices). When switch S1 is pressed (to represent an interrupt), LED RD4 blinks at a 1 Hz rate (once per second) until switch S1 is pressed again. Similarly, when switch S2 is pressed, LED RD5 blinks until switch S2 is pressed again. Timer 1 is set up to interrupt every half second. |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |