uHex_FTDI_connection_diagram

Sample Code

Low power Consumption Application

Please download the Arduino library microPoly Library first.

https://github.com/LeoYan/ArduinoLib/tree/master/microPoly

-Wake up by Interrupt



Code: pinTrigger.ino



Function: The uHex is in sleep state until pin2=LOW and pin3=HIGH. Once waked, the LED on the

board will flash for some seconds and then go to sleep again.

-Wake up by Timer



Code: timerTrigger.ino



Function：The uHex is waked by period timer (using watchdog timer). Once waked, the LED on the

board will flash for some seconds and then go to sleep again.

-Integrated Application



Code: measure.ino



Function：

1. The uHex is in sleep state until Timer is overtime or Button is pressed

2. The uHex sample data every 1 minute. If button is pressed the average data will be display on the

LCD screen. After some seconds, it will go to sleep again.

General Application

In the scope of uHex ports, the program from Arduino UNO/Pro Mini can be run on the uHex.

Powered By DFRobot © 2008-2017