L4993MD datasheet(16/31 Pages) STMICROELECTRONICS

Il numero della parte	L4993MD

Spiegazioni elettronici	Automotive low drop voltage regulator

PDF	31 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

16 / 31 page

Application information

L4993

16/31

DS5285 Rev 10

Application information

Figure 24. L4993 application schematic

Note:

The input capacitor Cs > 200 nF is necessary for the smoothing of line disturbances. The

output capacitor C01 > 100 nF is necessary for the stability of the regulation loop. In order to

damp output voltage oscillations during high load current surges, it is recommended put an

additional electrolytic capacitor C02 > 10 µF at the output pin.

3.1

Voltage regulator

Voltage regulator uses a p-channel transistor as a regulating element. With this structure,

very low dropout voltage at current up to 500 mA is obtained. The output voltage is

regulated up to transient input supply voltage of 40 V. No functional interruption due to over-

voltage pulses is generated. A short circuit protection to GND is provided. The voltage

regulator watchdog functionality can be disabled by putting WEn low.

L4993MD Scheda tecnica(PDF) 16 Page - STMicroelectronics