User Manual

20 of 24

Version 1.0

2017-11

SPOC (TM)+2 User Manual

Multichannel SPI High-Side Power Controller

 Tick the WRITE?-Box and select OUT0 and click ADD CMD (See Figure 32)

Figure 32 - Select OUT0 and add command

 Select no output in the WRITE-Box and click ADD CMD (See Figure 33)

Figure 33 - Select no output and add command

 Also typing in commands directly is possible (See SPOCTM+2 datasheet for command reference)

o

E.g.:



The command 80h means Write no output to OUT



The command 81h would mean Write to OUT and set OUT0 high.



See Figure 32 above

 Change the delay of command 81 to T_ON, the delay of command 80 to T_OFF (See Figure 34)