TUSB7320 datasheet(44/122 Pages) TI2

44 / 122 page

8.1.15 Subsystem Vendor ID Register

This register, which is used for system and option card identification purposes, may be required for certain

operating systems. This read-only register is a direct reflection of the Subsystem Access register, which is read/

write and is initialized through the EEPROM (if present) or can be written through the Subsystem Alias Register

at PCI Offset D0h.

PCI register offset: 2Ch

Default value: 0000h

Table 8-22. PCI Register 2Ch

Bit

No.

Reset

State

8.1.16 Subsystem ID Register

This register, which is used for system and option card identification purposes, may be required for certain

operating systems. This read-only register is a direct reflection of the Subsystem Access register, which is read/

write and is initialized through the EEPROM (if present) or can be written through the Subsystem Alias Register

at PCI Offset D0h.

PCI register offset: 2Eh

Default value: 0000h

Table 8-23. PCI Register 2Eh

Bit

No.

Reset

State

8.1.17 Capabilities Pointer Register

This read-only register provides a pointer into the PCI configuration header where the PCI power management

block resides. Because the PCI power management registers begin at 40h, this register is hardwired to 40h.

PCI register offset: 34h

Default value: 40h

Table 8-24. PCI Register 34h

Bit No.

Reset State

TUSB7320, TUSB7340

SLLSE76Q – MARCH 2011 – REVISED MARCH 2024

www.ti.com

Submit Document Feedback

Product Folder Links: TUSB7320 TUSB7340

TUSB7320 Scheda tecnica(PDF) 44 Page - Texas Instruments