ISO6441FDFPR datasheet(28/56 Pages) TI2

28 / 56 page

8.5 Device I/O Schematics

INx

VCCI

≅1M

≅1k

Figure 8-3. Input (INx) Default High (Device Without

F Suffix Device) Schematics

VCCI

≅1M

INx

VCCI

≅1k

Figure 8-4. Input (INx) Default Low (Device With F

Suffix Device) Schematics

ENx

VCCI

≅1M

≅1k

Figure 8-5. Enable (ENx) Schematics

VCCO

≅33

OUTx

Figure 8-6. Output (OUTx) Schematics

8.6 Overvoltage Tolerant Input

The input pins of this device, INx and ENx, support input signal voltage in excess of the supply voltage (VCCI) on

the input side of the device as long as the voltage on the inputs remains below the voltages listed in the Section

6.3 , and Absolute Maximum Ratings .

This allows the device to support input signal voltages on the inputs when the input supply, VCCI, is unpowered.

In this use case, the outputs transition to the default output state when the input side no longer has a valid

supply.

These inputs also provide the capability of the inputs to down translate input signal voltages up to the VIMAX in

the Section 6.3 . For example, an input signal 5V high-level can be used while VCCI is operating a 3.3V.

ISO6440, ISO6441, ISO6442

SLLSG01B – SEPTEMBER 2024 – REVISED NOVEMBER 2025

www.ti.com

Submit Document Feedback

Product Folder Links: ISO6440 ISO6441 ISO6442

ISO6441FDFPR Scheda tecnica(PDF) 28 Page - Texas Instruments