www.element14.com

www.farnell.com

www.newark.com

www.cpc.co.uk

Page <1>

V1.0

06/12/12

Plug

Features:

• A range of line and hand set insulation piercing plugs designed to

accept cordage to BT specification CW1311

• They are available in 4 and 6 way and are moulded with 'A'

polarisation, and sensors etc.

• Designed to allow new style telephones the total flexibility of being

moved from socket to socket like any other piece of equipment

• Equally suitable for other applications using flexible cords,

i.e keyboards, hand held controllers and sensors etc.

Specifications:

Maximum working voltage

: 200V DC

Current rating

: 250mA DC per contact

Insulation resistance

: 100MΩ at 500V DC

Maximum contact resistance

: <120mΩ

Contact life

: 1,000 mating cycles

Contact material

: Gold plated phosphor bronze

Body material

: Natural polyester

Part Number Table

Description

Part Number

Plug, 431A, 4Way

A135

Plug, 631A, 6Way

A136

Plug, 630A, 6Way

A172

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted

for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any

error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any

assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the

Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.

pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2012.