| Motore di ricerca datesheet componenti elettronici |
|
DA9213 Scheda tecnica(PDF) 28 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
DA9213 Scheda tecnica(HTML) 28 Page - Renesas Technology Corp |
|
28 / 62 page ![]() DA9213, DA9214, DA9215 Datasheet R16DS0598EJ0361 Rev.03.61 Nov 03, 2025 CFR0011-120-00 Page 28 VOUT FBAP R1 R2 FBAN Figure 19. Resistive Divider from VOUT to FBAN For example, to program the output voltage VOUT to 1.8 V, with VREF set to 1.2 V, suggest 10 kΩ on R1 and 20 kΩ on R2. Note: The resistors need to be properly selected since the output voltage accuracy will be directly affected by any errors on the resistors. The voltage across FBAP and FBAN (VREF) is guaranteed, but not the output voltage accuracy. CAUTION The followings are important notes that need to be considered before using resistive divider on DA9213, DA9214, and DA9215: 1. Please contact your region's Renesas representative when adopting the resistive divider technique. Renesas need to prepare a special OTP because incorrect OTP settings may result in a different output voltage than expected. 2. The voltage difference between input voltage and output voltage needs to be: above 1.2 V, VIN - VOUT > 1.2 V. 3. The total resistance (R1 + R2) is less than 40 kΩ. 4. It is recommended that the device is operated in PWM mode only. |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |