TMS320DM643 datasheet(53/162 Pages) TI

Il numero della parte	TMS320DM643

Spiegazioni elettronici	Video/Imaging Fixed-Point Digital Signal Processor

PDF	162 Pages

Scroll/Zoom	100%

Produttore elettronici	TI [Texas Instruments]

Homepage	http://www.ti.com

Logo

53 / 162 page

www.ti.com

3.3 Peripheral Configuration Lock

Unlock the PERCFG Register

Using the PCFGLOCK Register

Write to

PERCFG Register

to Enable/Disable Peripherals

Read from

PERCFG Register

Wait 128 CPU Cycles Before

Accessing Enabled Peripherals

TMS320DM643

Video/Imaging Fixed-Point Digital Signal Processor

SPRS269C – FEBRUARY 2005 – REVISED JANUARY 2007

By default, the McASP0, VP1, VP2, and I2C peripherals are disabled on power up. In order to use these

peripherals on the DM643 device, the peripheral must first be enabled in the Peripheral Configuration

during run-time. Care should also be taken to ensure that no accesses are being performed before

disabling the peripherals. To help minimize power consumption in the DM643 device, unused

peripherals may be disabled.

Figure 3-3 shows the flow needed to enable (or disable) a given peripheral on the DM643 device.

Figure 3-3. Peripheral Enable/Disable Flow Diagram

Submit Documentation Feedback

Device Configurations

TMS320DM643 Scheda tecnica(PDF) 53 Page - Texas Instruments