M50FW080K5TP datasheet(37/56 Pages) STMICROELECTRONICS

37 / 56 page

M50FW080

DC and AC parameters

37/55

DC and AC parameters

This section summarizes the operating measurement conditions, and the DC and AC

characteristics of the device. The parameters in the DC and AC characteristics Tables that

follow, are derived from tests performed under the Measurement Conditions summarized in

Table 16, Table 17 and Table 18. Designers should check that the operating conditions in

their circuit match the operating conditions when relying on the quoted parameters.

Figure 8.

FWH interface AC testing input output waveforms

Table 16.

Operating conditions

Symbol

Parameter

Min.

Max.

Unit

VCC

Supply Voltage

3.0

3.6

Ambient Operating Temperature (Device Grade 5)

–20

°C

Table 17.

FWH interface AC measurement conditions

Parameter

Value

Unit

Load Capacitance (CL)10

Input Rise and Fall Times

≤1.4

Input Pulse Voltages

0.2 VCC and 0.6 VCC

Input and Output Timing Ref. Voltages

0.4 VCC

Table 18.

A/A Mux interface AC measurement conditions

Parameter

Value

Unit

Load Capacitance (CL)30

Input Rise and Fall Times

≤10

Input Pulse Voltages

0 to 3

Input and Output Timing Ref. Voltages

1.5

AI03404

0.6 VCC

0.2 VCC

0.4 VCC

IO > ILO

IO < ILO

Input and Output AC Testing Waveform

Output AC Tri-state Testing Waveform

M50FW080K5TP Scheda tecnica(PDF) 37 Page - STMicroelectronics

M50FW080K5TP Scheda tecnica(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Scheda tecnica Scarica

Link URL