DIO2216

Version 1.3, Apr 2026

www.dioo.com

© 2026 Dioo Microcircuits Co., Ltd. Jiangsu.

2

2. Absolute Maximum Ratings

Exceeding the maximum ratings listed under Absolute Maximum Ratings when designing is likely to

damage the device permanently. Do not design to the maximum limits because long-time exposure to them

might impact the device’s reliability. The ratings are obtained over an operating free-air temperature range

unless otherwise specified.

Symbol

Parameter

Rating

Unit

Supply voltage (Maximum)

7

V

VIN+, VIN- (1)

Analog inputs

Differential (VIN+) - (VIN–)

-5.5 to 5.5

V

Common-mode(2)

GND-0.3 to 5.5

V

Output(2)

GND-0.3 to (V+) + 0.3

V

Input current into any pin(2)

5

mA

TA

Operating temperature

-55 to 150

°C

TSTG

Storage temperature

-65 to 150

°C

TJ

Junction temperature (Maximum)

150

°C

Note:

(1) VIN+ and VIN– are the voltages at the IN+ and IN– pins respectively.

(2) Input voltage at any pin may exceed the voltage shown if the current at that pin is limited to 5 mA.

3. Recommended Operating Conditions

Recommended operating conditions are specified to ensure optimal performance to the datasheet

specifications. The ratings are obtained over an operating free-air temperature range unless otherwise

specified.

Symbol

Parameter

Rating

Unit

VCM

Common-mode input voltage

1.8 to 5.5

V

Supply voltage

1.8 to 5.5

V

TA

Operating temperature

-40 to 125

°C

4. ESD Ratings

When a statically-charged person or object touches an electrostatic discharge sensitive device, the

electrostatic charge might be drained through sensitive circuitry in the device. If the electrostatic discharge

possesses sufficient energy, damage might occur to the device due to localized overheating.

Model

Condition

Value

Unit

Human-body model

ANSI/ESDA/JEDEC JS-001

±8

kV

Charged-device model

ANSI/ESDA/JEDEC JS-002

±2

kV