 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
DIO7S102 Scheda tecnica(PDF) 1 Page - DIOO MICROCIRCUITS CO., LTD |
|
|
|||||||||||||||||||||||||||||
DIO7S102 Scheda tecnica(HTML) 1 Page - DIOO MICROCIRCUITS CO., LTD |
|
|
1 / 24 page  DIO7S102 Version 1.3, Aug 2025 www.dioo.com © 2025 Dioo Microcircuits Co., Ltd. Jiangsu I 2-Bit Bidirectional Voltage Level Translator for Open-Drain and Push-Pull Applications Features Wide supply voltage range: − 1.08 V to 3.6 V on A port − 1.65 V to 5.5 V on B port (VCCA ≤ VCCB) Maximum data rates: − 120 Mbps (Push pull) − 2 Mbps (Open drain) Low supply current: ICCA + ICCB = 1 μA VCC isolation feature: If either VCCA or VCCB input is at GND, all outputs are in the high-impedance state OE input circuit referenced to VCCA No power-supply sequencing required. VCCA or VCCB can be ramped first IOFF supports partial power-down mode operation Operating temperature range: -40°C to 85°C Applications I2C/SMBus GPIO UART Package Information Description The DIO7S102 is a 2-bit bidirectional voltage level translator with output enable (OE) pin. The device uses two separate configurable power-supply rails. The A port is designed to track VCCA and the VCCA supplies voltage from 1.08 V to 3.6 V, so the DIO7S102 meets the low voltage system application. The B port is designed to track VCCB and VCCB supplies voltage from 1.65 V to 5.5 V. VCCA should not exceed VCCB. This allows for universal low-voltage bidirectional translation between any of the 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage system. The DIO7S102 can be applied to level conversion of open drain output such as I2C/SMBus. The DIO7S102 has an output enable pin which control the output status. When the OE input is low, all I/Os are placed in the high-impedance state. Pins of A port and OE are referenced to VCCA and pins of B port are referenced to VCCB. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The DIO7S102 is available in VSSOP-8 package. It is specified over ambient temperature range of -40°C to 85°C, which meets the requirements of industry and consumer applications. Simplified Schematic Part Number Package Body Size DIO7S102 VSSOP-8 2.3 mm × 2.0 mm |
Codice articolo simile - DIO7S102 |
|
Descrizione simile - DIO7S102 |
|
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
