| Motore di ricerca datesheet componenti elettronici |
|
CFSR500P Scheda tecnica(PDF) 3 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
CFSR500P Scheda tecnica(HTML) 3 Page - Clarke International |
|
3 / 8 page ![]() 3 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com SAFE WORKING PRACTICES 1. Read, study, understand and follow all warnings/cautions and instructions before use. Failure to do so may result in injury and/or property damage. 2. ALWAYS load or unload on a solid, level, well lit surface. 3. Make sure that the truck or trailer is in a locked position. (Make sure parking brakes are on). Use wheel chocks. If the truck or trailer moves forward while loading or unloading, the ramps may slip off the vehicle causing the load to fall. 4. DO NOT overload the ramps. • As a loading ramp - Maximum capacity single = 250kg, pair = 500kg. All loads must be evenly distributed. • As a vehicle ramp - Maximum capacity single = 800kg, pair = 1600kg. All loads must be evenly distributed. 5. Do not exceed the rated capacity of the tailgate - see your vehicle owner's manual. • The maximum height of the tailgate that the ramp attaches to is 76cm. 6. Always use the safety straps to securely fasten the ramps to the vehicle to prevent the ramp slipping off the tailgate. 7. Keep children and unauthorised persons away from the work area. 8. Inspect the ramps before each use. Check fasteners for tightness and replace any worn or damaged parts. Replace the safety strap if the webbing is frayed or worn. 9. Ramp surfaces must be clean, dry and free from oil, grease and water. 10. Any ramp that appears to be damaged in any way, is found to be worn, or operates abnormally MUST BE REMOVED FROM SERVICE IMMEDIATELY UNTIL REPAIRED. 11. If the ramps are believed to have been subjected to abnormal load or stress they MUST BE REMOVED FROM SERVICE IMMEDIATELY UNTIL FULLY INSPECTED FOR DAMAGE. 12. DO NOT modify the ramps in any way. 13. Carefully roll or winch equipment up or down the ramps. Never drive or ride on your equipment while loading or unloading. WARNING: THE WARNINGS, CAUTIONS AND INSTRUCTIONS REFERRED TO IN THIS MANUAL CANNOT COVER ALL POSSIBLE CONDITIONS AND SITUATIONS THAT MAY OCCUR. IT MUST BE UNDERSTOOD THAT COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE APPLIED BY THE OPERATOR. |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |